Oki MPS3537mc Setup Manual page 5

4. Loosen the screws and take off the cover.
• Screws: 15 places
5. Set [A] as shown in the figure.
* Making sure that its terminal contacts that of
[A], fully insert the connector and push it to
the board side to set it.
6. Wire the cable of [D] as shown in the figure,
and then hook [D].
7. Secure [D] with [f].
• f: 1
A
D
f
5 / 9
A
D
D
GN-1060 with GN-3010