Table of Contents
Advertisement
4.
Remove the power button board (3) and cable.
Reverse this procedure to install the power button board.
Fingerprint reader board
Description
Fingerprint reader board (includes cable and bracket)
Before removing the fingerprint reader board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Top cover (see
Battery on page
47), and then remove the following components:
Hard drive on page
48)
Optical drive on page
Keyboard on page
59)
Top cover on page
63)
53)
Component replacement procedures
Spare part number
681975-001
69
Hide quick links:
Advertisement
Table of Contents
