Optical Drive - HP ENVY dv7-7200 Maintenance And Service Manual

Optical drive

NOTE: The optical drive spare part kit includes a bezel and bracket.
Description
Blu-ray Disc ROM with SuperMulti DVD±R/RW Double-Layer Drive
Blu-ray Disc R/RW with SuperMulti Drive
DVD±RW Double-Layer with SuperMulti Drive
Before removing the optical drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the optical drive:
1. Remove the Phillips PM2.5×4.0 screw (1) that secures the optical drive to the computer.
2. Use a flat-blade screw drive or similar tool to press on the optical drive bracket tab (2) to release
the optical drive.
Battery on page 47).
Hard drive on page 48).
Component replacement procedures
Spare part number
681983-001
681984-001
681982-001
53