Format (Media Initialization); Frame No. (Frame Number Storage); 5.1 The Software Components - FujiFilm FinePix F610 Owner's Manual

SET–UP
FORMAT ( media initialization )
ＦＯＲＭＡＴ ＦＯＲＭＡＴ
ＦＯＲＭＡＴ ＯＫ？ ＦＯＲＭＡＴ ＯＫ？
ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ
ＯＫ ＯＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
ＯＫ ＯＫ ＳＥＴ ＳＥＴ
FRAME NO. ( frame number storage )
CONT. RENEW
A A
B B
Formatted xD-Picture Card used for both
A and B.
１Ｍ １Ｍ
100-0001
Ｉ Ｓ Ｏ Ｉ Ｓ Ｏ ２ ０ ０ ２ ０ ０
7 /20/ 2003 12:00 PM
2000 F2 .8
Directory number
File number
Frame number
74
All the frames (files) are erased.
The xD-Picture Card is initialized for use in the
camera. You should copy important frames (files)
that you do not want to be erased to your computer
or other media.
1 Press "d" or "c" to select "OK".
2 Pressing the "MENU/OK" button erases all the
frames (files) and initializes the xD-Picture
Card.
Protected frames (files) are also erased.
G
!
If the " " " " "
" " message appears, refer to P.96
before formatting the media and take the appropriate
measures.
This setting specifies whether frame numbers
continue on from the last number used or start
again from the beginning.
CONT. : Pictures are stored beginning from the
highest file number stored on the last xD-
Picture Card used.
RENEW: Pictures are stored on each xD-Picture
Card beginning with a file number "0001".
Setting this function to "CONT." makes file
management easier as it ensures that file names
are not duplicated when images are downloaded to
a PC.
G
!
If a " RESET" is performed, the FRAME NO. setting
("CONT." or "RENEW") changes to "CONT." but the frame
number itself does not revert to "0001".
G
!
If the xD-Picture Card already contains image files with file
numbers higher than the highest file number on the last xD-
Picture Card, images are stored beginning from the highest
file number on the current xD-Picture Card.
You can check the file number by viewing the
image. The last 4 digits of the 7-digit number in the
top right corner of the screen are the file numbers,
while the first 3 digits show the directory number.
G
!
When you change the xD-Picture Card, always switch the
camera off before you open the battery cover. If you open the
battery cover without switching the camera off, the Frame
NO. Memory will not function.
G
!
File number run from 0001 to 9999. Once 9999 is exceeded,
the directory number changes from 100 to 101. The
maximum number is 999–9999.
G
!
The displayed frame number may differ for images
photographed on other cameras.
G
!
If the " " message appears, see P.96.
5 Software
Installation
Connect the camera
with "
as the USB setting
(➡P.85).
USB Mass Storage
Driver
" or
Allows a digital camera to be used
as USB Mass Storage (removable
disk drive, card reader).
FinePixViewer
Allows you to display thumbnail lists of the images stored on your PC or in the camera, print the images
individually or as an index, display the images at full size and perform some basic image processing.
PictureHello
Used for videoconferencing (Windows only).
Acrobat Reader R
Software used to read PDF-format documents on a
personal computer. This software is needed to read
the User's Guides for FinePixViewer (Mac OS9 only).
✽ Note that the software configuration differs slightly depending on your operating system.

5.1 THE SOFTWARE COMPONENTS

Connect the camera
" selected with " PC " selected
as the USB setting.
Exif Launcher
Launches the FinePixViewer
software when a camera is
connected. Allows a digital camera to be
used as a PC Camera
(Windows/Mac OS9 only).
ImageMixer VCD2
for FinePix CONVERTER LE
Creates a FinePix CD Album Used when you open RAW
files that were photographed
on cameras that support the
RAW file format.
R
FinePix F610 is not supported
for CCD-RAW file.
USB PC Camera
Driver
RAW FILE
75