Sound; Lcd Brightness; Format; R:iauto Power Off - FujiFilm FINEPIX Z30 Owner's Manual

Hide thumbs Also See for FINEPIX Z30:
Table of Contents

Advertisement

The Setup Menu
II
SOUND
Choose the sounds used for the shutter, at start
up, and for camera controls. Press the selector
up or down to highlight an option and press
left or right to select a sound. Press
MENU/OK
to
select.
~
AUTO POWER OFF
Choose the length of time before the camera
turns off automatically when no operations
are performed. Shorter times increase battery
life; if
OFF
is selected, the camera must be
turned off manually. Note that regardless of
the option selected, the camera will not turn
off automatically when connected to a printer
(pg. 47) or computer (pg. 52), while recording
or viewing a movie or when a slide show is in
progress (pg. 71).
~
Tip: Reactivating the Camera
For shooting, close the lens cover, and then open it
fully. For playback, press the
~
button for a second.
[l]
Cautions
• All data-including protected pictures-will be
deleted. Be sure important files have been copied to
a computer or other storage device.
• Do not open the battery cover during formatting.
c:.. ••.
1m
FORMAT OK?
ERASE ALL DATA
OK
BACK'
' : 9:'
lCO BRIGHTNESS
_OK~
II
LCD BRIGHTNESS
Press the selector up or
down to choose monitor
brightness and press
MENU/
OK
to select.
III
FORMAT
Format internal memory or
a memory card. If a
memory card is inserted in
the camera,
ED
will be
displayed in the dialog
shown at right and this option will format the
memory card. If no memory card is inserted,
In!
will be displayed and this option will format
internal memory. Press the selector left to
highlight
OK
and press
MENU/OK
to begin
formatting.
85

Advertisement

Table of Contents
loading

Table of Contents