5.2 Installation On A Windows Pc - FujiFilm FinePix F610 Owner's Manual

5.2 INSTALLATION ON A Windows PC

Pre-installation checklist
To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.
Compatible PCs IBM PC/AT or compatible
Operating System
Windows 98 (including the Second Edition)
Windows Millennium Edition (Windows Me)
Windows 2000 Professional
Windows XP Home Edition
Windows XP Professional
CPU 200 MHz Pentium or better recommended (800 MHz Pentium
recommended for Windows XP)
RAM 64MB minimum (128 MB minimum for Windows XP), 256 MB or more
recommended
Hard disk space
Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum
(When ImageMixer VCD2 for FinePix is used: 2 GB or better)
800 × 600 pixels or better, 16-bit color or better
Display
(When ImageMixer VCD2 for FinePix: 1024 × 768 or better)
✽3
Internet connection i To use FinePix Internet Service, videoconferencing or mail attachment
function
An Internet connection and e-mail transmission software
i Connection speed: 56k or better recommended
✽4
Sound functions Speakers, microphone and sound card
✽1 Models with a USB interface as a standard feature and one of the above operating systems preinstalled.
✽2 When you install the software, log in using a system administrator account (e.g. "Administrator").
✽3 Required to use the FinePix Internet Service and videoconferencing. The software can still be installed even if you do not
have an Internet connection.
✽4 Sound functions are required for videoconferencing.
N N
Notes
i Connect the camera directly to the computer using the USB cable (included). The software may not
operate correctly when you use an extension cable or connect the camera via a USB hub.
i When your computer has more than one USB port, the camera can be connected to either port.
i Push the USB connector fully into the socket to ensure that it is securely connected. The software
may not operate correctly if the connection is faulty.
i Additional USB interface board is not guaranteed.
i Windows 95 and Windows NT cannot be used.
i Operation is not guaranteed on home-built computers or on computers running updated operating
system software.
i If your Internet connection is via a router or via a LAN (connecting machines on the LAN to the
Internet), you cannot use videoconferencing.
i If you are using Windows XP and you tick the "Protect my computer and network by limiting or
preventing access to this computer from the Internet" checkbox in the Internet connection firewall
settings, videoconferencing cannot be used.
i When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for
the FinePix Internet Service are deleted from your computer. Click the [Register now] button, enter
your registered user ID and password and download the menu again.
76
✽1
✽2
✽2
✽2
III or better
Do not connect the camera to your PC until the software installation is completed.
Install FinePixViewer as instructed in the Quick Start Guide.
1
N
Launching the Installer Manually
1 Double-click the "My Computer" icon.
✽ Windows XP users should click "My Computer" in the "Start" menu.
2 Right-click "FINEPIX" (CD-ROM drive) in the "My Computer" window and select "Open".
3 Double-click "SETUP" or "SETUP.exe" in the CD-ROM window.
✽ The way file names are displayed differs as described below depending on your computer settings.
i File extensions (3-letter suffixes indicating the file type) may be shown or hidden. (e.g. Setup.exe or Setup)
i Text may be shown normally or all in uppercase (e.g. Setup or SETUP).
N N
Installing other applications
You may see messages for installing, NetMeeting, ImageMixer VCD2 for FinePix and WINASPI. Install
these applications as directed by the on-screen instructions. The installation screens for these
applications are displayed as required.
After restarting the PC, install DirectX as directed by the on-screen instructions and then restart
2
your PC again. If the latest version of DirectX is already installed on your PC, this installation is
not performed.
After restarting the PC, the "Installation of the FinePixViewer has been completed" message
3
appears.
N
77