FujiFilm FinePix F610 Owner's Manual page 16

VIEWING YOUR IMAGES (
PLAYBACK MODE
Trimming
After playback zoom has been used to adjust the area to be viewed, the image can be saved as a
separate file.
1
Playback zoom
Panning
2
１Ｍ １Ｍ 100-0001
１Ｍ １Ｍ
Ｉ Ｓ Ｏ ２ ０ ０ Ｉ Ｓ Ｏ ２ ０ ０
7 /20/ 2003 12:00 PM
500 F5 .6
3
１Ｍ １Ｍ
ＲＥＣ ＯＫ？ ＲＥＣ ＯＫ？
１Ｍ １Ｍ
１Ｍ １Ｍ 100-0001
Ｉ Ｓ Ｏ Ｉ Ｓ Ｏ ２ ０ ０ ２ ０ ０
7 /20/ 2003 12:00 PM
500 F5 .6
You can switch back to single-frame playback mode at any time by pressing the "
button.
30
PLAYBACK )
Use playback zoom to adjust the area to be viewed
(➡P.29).
Press the " " button.
The size of the saved image differs depending on
the zoom scale. If the size of the saved image is
less than 1MB, " " disappears on the display
panel and the image cannot be trimmed.
Check the size of the image to be saved and then
press the " " button to save the image. Trimmed
images are saved as separate files in the final
frame.
I Saved image sizes
To print at A4 size
To print at A4/A5 size
To print at A5/A6 size
To print at A6 size
" (
ERASING IMAGES (
PLAYBACK MODE
1
1 0
2
１Ｍ １Ｍ
ＩＳＯ ＩＳＯ ２００
7 /20/ 2003 12:00
500 F5 .6
3
ＥＲＡＳＥ ＯＫ？ ＥＲＡＳＥ ＯＫ？
１Ｍ １Ｍ 100-0009
ＩＳＯ ＩＳＯ ２００ ２００
7 /20/ 2003 12:00
500 F5.6
ＯＫ ＯＫ
Erase
)
ERASE FRAME )
1 Set the Power switch to "
2 0
2 Press "d" or "c" to select the frame (file) to be
erased.
Mistakenly erased frames (files) cannot be
recovered. Take care when erasing frames (files).
Copy important frames (files) that should not be
erased to a PC's hard disk, etc.
Press the " " button. An erase confirmation
100-0009
２００ screen is displayed.
PM
You can do the following in the erase confirmation
Previous frame
screen:
h To select frames (files): "d" or "c"
h To erase the displayed frame (file): "
h Return to single-frame playback: "
Next frame
PM
G
!
Frames (files) labelled as "
unprotected before being erased.
G
!
If "
DPOF settings have been specified for that frame (file). Press
Back (Cancel)
the " " button again to erase the frame (file).
".
" button
" button
" must be
" is displayed for a frame (file),
31