Table of Contents
Advertisement
Notes on the Power Supply
I Handling the Battery
To avoid injury or damage, observe the following:
h Do not allow the metal portions of the battery to touch
other metal objects.
h Do not bring the battery close to a flame or throw it into a
fire.
h Do not attempt to disassemble or modify the battery.
h Do not recharge the battery with chargers other those
specified.
h Dispose of used batteries promptly.
To avoid damaging the battery or shortening its
life, observe the following:
h Do not drop the battery or otherwise subject it to strong
impacts.
h Do not immerse the battery in water.
To ensure that you obtain optimum battery
performance, observe the following:
AC Power Adapter
Use only the AC-5VW AC Power Adapter with your
FinePix F610 Digital Camera. The use of other AC power
adapters may result in damage to your camera.
h The AC Power Adapter is only intended for indoor use.
h Plug the connection cord plug securely into the DC input
terminal of the FUJIFILM Digital camera.
h Turn off the power switch of the FUJIFILM Digital camera
before disconnecting the connection cord from the
FUJIFILM Digital camera's DC input terminal. To
disconnect, take hold of the plug and pull it out (do not
disconnect it by pulling on the cord).
h Do not use the AC power adapter with any device except
the specified device.
h During use, the AC power adapter will become hot to
touch, but this is normal.
h Do not disassemble the AC power adapter. Doing so
could be dangerous.
h Do not use the AC power adapter in a place with high
temperature and high humidity.
h Do not drop or subject the AC power adapter to strong
shocks.
h The AC power adapter may emit a humming noise, but
this is normal.
h If used near a radio, the AC power adapter may cause
WARNINGS
To reduce the risk of fire or electric shock, do not expose the AC power adapter to rain or moisture.
The AC power adapter shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the AC power adapter.
IMPORTANT SAFETY INSTRUCTIONS
hRead these instructions.
hKeep these instructions.
hHeed all warnings.
hFollow all instructions.
hDo not use this apparatus near water.
hClean only with dry cloth.
hDo not block any ventilation openings,
Install
in
accordance
with
manufacturer's instructions.
hDo not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
hProtect the power cord from being
94
walked on or pinched particularly at
h Always keep the battery terminals clean.
h Store the battery in a cool, dry place. Storing the battery
for long periods in a hot location can shorten the battery
life.
If you use the battery for a long period, the camera
body and the battery itself will become warm. This is
normal and is not a malfunction. Use the AC power
adapter supplied with the camera if you are taking
pictures or viewing images for a long period of time.
I Specifications of the Enclosed NP-40
Nominal voltage
DC 3.7V
Nominal capacity
710 mAh
Operating temperature
0°C to +40°C (+32°F to +104°F)
35.3 mm × 40 mm × 6 mm
Dimensions
(1.39 in. × 1.6 in. × 0.24 in.)
(W × H × D)
Mass (Weight)
Approx. 20g (0.7 oz.)
✽ These specifications are subject to change without notice.
static, so play the radio in a distant place.
✽ Very occasionally, DC output will be prevented by the
operation of the internal protection circuit. In this event,
unplug the AC-5VW AC power adapter from the power
socket for a few moments and then plug it in again. This
will restore DC output.
I Specifications (AC-5VW)
Power Supply
AC 100V to 240V,50/60Hz
Rated Input Capacity
13W(U.S.A.and Canada)
0.08A to 0.2A(other countries)
Rated Output
DC 5.0V 1.5A
Temperature During Use
0°C to +40°C (+32°F to +104°F)
Storage Temperature
–10°C to +70°C
(+14°F to +158°F)
40 mm × 21 mm × 79 mm
Dimensions (MAX.)
(1.6 in. × 0.8 in. × 3.1 in.)
(W × H × D)
Mass (Weight)
Approx. 110 g (3.9 oz.)
(excluding power cable)
✽ These specifications are subject to change without notice.
plugs, convenience receptables, and the
point where they exit from the apparatus.
hOnly use attachments/accessories
specified by the manufacturer.
hUnplug this apparatus during lightning storms
or when unused for long periods of time.
hRefer all servicing to qualified service
personal.
the
Servicing is required when the apparatus
has been damaged in any way, such as
power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not
operate normally, or has been dropped.
Notes on the xD-Picture Card™
I Image Memory Card
h This Image Memory Card is a new image recording
media (xD-Picture Card) developed for digital
cameras. The Image Memory Card consists of a
semiconductor memory (NAND-type flash memory)
to record digital image data.
The recording process is electrically performed and
enables erasure of existing image data as well as re-
recording of new image data.
h When using a new Memory Card, or a Memory Card
that has been initialized by a PC, be sure to initialize
(format/initialize) the card with your digital camera
before using it.
I Protecting Your Data
h Data may be lost or destroyed in the following
situations. Please note that FUJIFILM assumes no
responsibility for data that is lost or destroyed.
1. Removal of the memory card or turning the power
off while the memory card is being accessed (i.e.,
during record, erase, initialization, and playback
operations).
2. Improper handling and use of the memory card by
the user or third party.
h We recommend saving your important data to
another media (i.e., MO disk, CD-R, hard disk, etc.).
I Notes on Handling xD-Picture Card
h Keep xD-Picture Cards out of the reach of small
children. When storing xD-Picture Cards, ensure
that they are kept in a location out of the reach of
small children to prevent a card being accidentally
swallowed. An xD-Picture Card could cause
suffocation if accidentally swallowed. If a child
swallows an xD-Picture Card, seek medical advice
immediately.
h Make sure that the memory card is straight when
you insert into the camera etc.
h The memory card is a precision electronic
instrument. Do not apply pressure or shock, and
avoid bending.
h Do not use the memory card in a hot, humid, or
corrosive environment.
h If the contact area on the card is soiled (dust,
fingerprints, etc.), wipe it clean with a soft, dry cloth.
h Clean the memory card with a soft dry piece of cloth
when dirty.
h xD-Picture Cards should be kept in their special
cases or carrying cases when being stored or
carried around.
h The memory card can be used reliably for a long
period of time, but will eventually lose its ability to
store and play back image data. At this point,
replace with a new memory card.
h Never remove the xD-Picture Card or switch the
camera off during data recording, during data
erasing (xD-Picture Card formatting) or during
frame advance when images are being played back.
These actions could result in damage to the xD-
Picture Card.
h The use of xD-Picture Cards is recommended with
the FinePix F610.
The camera quality cannot be guaranteed when
cards other than those manufactured by FUJIFILM
are used.
h The xD-Picture Card may feel warm when it is
removed from the camera after extended periods of
picture taking or image viewing. This is normal and
does not indicate a fault.
h Do not affix labels to the xD-Picture Card.
This could result in the label peeling off and causing
a fault when the card is inserted or removed.
I Notes on Using xD-Picture Card with a
PC
h If you intend to take photos using an xD-Picture
Card that has been used on a PC, format the xD-
Picture Card on your camera.
h When you format an xD-Picture Card in the camera
and then shoot and record images, a directory
(folder) is automatically created. Image data is then
recorded in this directory.
h Do not change or delete the directory (folder) names
or file names on the xD-Picture Card from your PC
as this will make it impossible to use the xD-Picture
Card in your camera.
h Always use the camera to erase image data on an
xD-Picture Card.
h To edit image data, copy the image data to the PC's
hard disk and then edit the copied data.
h Do not copy files other than those that will be used
by the camera.
I Specifications
Type
Image memory card for digital
cameras (xD-Picture Card)
Memory type
NAND-type flash memory
Conditions for use
Temperature:
0°C to +40°C
(+32°F to +104°F)
Humidity:
80% max. (no condensation)
25 mm × 20 mm × 2.2 mm
Dimensions
(0.98 in. × 0.79 in. × 0.09 in.)
(W × H × D)
95
Hide quick links:
Advertisement
Table of Contents
