Input Label; Colour System Setting (For Tv/Av Input Mode) - Sharp AQUOS LC-32GA4E Operation Manual

Useful adjustment settings

Input Label

You can assign each input source a label you like.
1
Press b to select the desired input source.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Setup".
4
Press a/b to select "Input Label", and then
press OK.
5
Press a/b/c/d to select each character
of the new name for the channel, and then
press OK.
A B C
K L M
U V W
0 1 2 3 4 5 6 7 8 9
6
Repeat the above until the name is fully spelt
out, and then press OK.
• The name can be 6 characters or less.
NOTE
• You cannot change labels if the input source is TV.
40
DVD
D E F G H I J CLEAR
N O P Q R S T BACK
X Y Z + – . _
END
INPUT SOURCE
TV
INPUT1
INPUT2
DVD
INPUT4
INPUT5
(Example)
Colour system setting (for TV/AV
input mode)
u can change the colour system to one that is
Yo
compatible with the image on the screen.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Colour System", and
then press OK.
4
Press a/b to select a compatible video
signal system of your equipment, and then
press OK.
• "NTSC 3.58" cannot be selected in TV tuner
mode.
NOTE
• Factory preset value is "AUTO".
• If "AUTO" is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• This function is available for AV input mode and TV tuner
mode.
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60