Fine Sync. Adjustment (Pc Input Mode Only); Input Select - Sharp AQUOS LC-32GA4E Operation Manual

Useful adjustment settings
Fine Sync. adjustment (PC input
mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Fine Sync.", and then
press OK.
4
Press a/b to select the specific
adjustment item.
H-Pos. [90]
V-Pos. [39]
Clock [90]
Phase [20]
Reset
5
Press c/d to adjust the item to your
desired position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select "Reset", and then press OK.
Selected item
Centres the image by moving it to the left or
H-Pos.
right.
Centres the image by moving it to the up or
V-Pos.
down.
Adjusts when the image flickers with
Clock
vertical stripes.
Adjusts when characters have low contrast
Phase
or when the image flickers.
– +
– +
+
–
– +
Description

Input Select

Selecting input source
Can use for selecting the input source.
1
Press b on the remote control unit or
INPUT on the Display.
2
Press b on the remote control unit or
INPUT on the Display to select the input
source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
Selecting input signal type
For setting the signal type of external equipment.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Input Select", and then
press OK.
4
Press a/b/c/d to select a signal type you
want to set, and then press OK.
Input type
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment
for the signal type.
Signal type
CVBS, RGB
Y/C, CVBS
COMPONENT, Y/C, CVBS, RGB
AUTO, S-Video, Video
PC digital, PC analogue, AV
digital, AV analogue
39