Simple Button Operation For Changing Volume/Sound - Sharp AQUOS LC-32GA4E Operation Manual

Watching TV
Using SOUND on the remote control unit
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press SOUND, the mode switches
between NICAM STEREO and MONO.
When receiving a bilingual signal
Each time you press SOUND, the mode switches
among NICAM CH A, NICAM CH B, NICAM CH AB
and MONO.
When receiving a monaural signal
Each time you press SOUND, the mode switches
between NICAM MONO and MONO.
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press SOUND, the mode switches
between STEREO and MONO.
When receiving a bilingual signal
Each time you press SOUND, the mode switches
among CH A, CH B and CH AB.
When receiving a monaural signal
When you press SOUND, "MONO" displays.
NOTE
• When no signal is input, the sound mode will display
"MONO".
Simple button operation for changing
volume/sound
Changing the volume
You can change the volume on the Display or on the
remote control unit.
il l l l l /k k k k k
• To increase the volume, press ik k k k k .
• To decrease the volume, press il l l l l .
NOTE
• "TV", "INPUT1", "INPUT2", "INPUT3", "INPUT4", and
"INPUT5" modes can each store volume adjustment
values separately.
When "INPUT 4" is set to "Audio Out (Variable)", the
indicator on the screen changes as shown below.
Audio status
Output device
Fixed
Speaker
Variable sound
Constant as
AUDIO OUTPUT
specified
NOTE
• See page 46 for details on the audio out function.
20
20
Audio out
Variable
Mute
Variable sound
17