Useful Features; Dual Screen Functions - Sharp AQUOS LC-32GA4E Operation Manual

Useful features

Dual screen functions

Allows you to display two pictures on the screen at
one time.
Dual screen
You can display two pictures except when inputting
from the INPUT 5 terminal.
1
Press c.
• Dual screen displays and a selected input
source image displays.
z
z
2
Press SELECT to set either screen to be
active.
• "z" displays on the active screen, which has
sound output.
3
Press b to select another input source on
the active screen.
• A selected image displays.
4
Press c to exit dual screen.
NOTE
• This function does not work under the following input
conditions:
1INPUT 5 mode,
2Two pictures from the same source (e.g. INPUT 1 and
INPUT 1),
3Two pictures with different vertical frequency (e.g. PAL
and PAL-60),
4HDTV signal source (480P/1080i/720P) is input on the
right side screen display.
• When this function is not available, "No dual screen display
available." will display.
Picture and still image
You can freeze a motion picture on the display.
1
Press d.
• A moving image displays on the left screen and
a still image displays on the right screen. The
still image is one frame captured from a moving
image at the moment you press d.
2
Update the still image by pressing OK.
• Each time you press OK, the image on the right
screen updates.
3
Press d to exit still image.
NOTE
• This function does not work in INPUT 5.
• When this function is not available, "No still image display
available." will display.
• The still image automatically goes out after 30 minutes.
FREEZE
49