Table of Contents
Advertisement
Useful adjustment settings
Input Label
You can assign each input source a label you like.
1
Press TV/VIDEO to select the desired input
source.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Setup".
4
Press a/b to select "Input Label", and then
press ENTER.
5
Press a/b/c/d to select each character
of the new name for the input source, and
then press ENTER.
DVD
A
B
C
D
K
L
M
N
U
V
W
X
0 1 2 3 4 5 6 7 8 9
6
Repeat the above until the name is fully spelt
out, and then press ENTER.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select "END", then press
ENTER to exit from the labelling menu.
INPUT SOURCE
TV
NOTE
• You cannot change labels if the INPUT SOURCE is TV.
E
F
G
H
I
J
CLEAR
O
P
Q
R
S
T
BACK
Y
Z
+
–
.
_
END
(Example)
INPUT1
INPUT2
DVD
INPUT4
(Example)
Image position
For adjusting a picture's horizontal and vertical position.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Position", and then
press ENTER.
4
Press a/b to select "H-Pos." or "V-Pos.".
H-Pos.
[0]
–10
V-Pos.
[0]
–20
Reset
5
Press c/d to adjust the item to your desired
position.
Selected item
H-Pos.
Centres the image by moving it to the left or right.
V-Pos.
Centres the image by moving it up or down.
NOTE
• For resetting all adjustment items to the factory preset values,
press a/b to select "Reset", and then press ENTER.
• Adjustments are stored separately according to input
source.
+10
+20
Description
31
Advertisement
Table of Contents
