Sharp ZQ-800 Operation Manual page 31

e00_zq800(introduction)60.book Page 29 Wednesday, April 24, 2002 8:45 PM
The Find screen appears.
3.
Enter the keywords and press
The unit will display entries that contain the keywords you entered.
4.
Select the entry by pressing
The Details screen appears.
Changing the character size
The character size of the Index and Details screens can be changed between Large
and Small. The default character size is set to Small.
1.
Press on the Address Book Index screen as an example.
2.
Select "View Setting..." by pressing
The Index View Setting screen appears.
3.
Highlight "Font" by using
then press
4.
Highlight "OK" by using
The Index View Setting screen returns to the previous screen.
to start searching.
and press
, select the desired font size by pressing
.
and press
Basic Operation
.
and press .
(or tap "OK").
29
, and