Table of Contents
Advertisement
e00_zq800(introduction)60.book Page 104 Wednesday, April 24, 2002 8:45 PM
104 Other Applications
• When you complete the settings, tap "OK" on the Settings screen. The screen
returns to the Main menu screen.
• The settings you made will not be stored unless you tap "OK" on the Settings
screen.
Setting the Start-up screen/Opening screen/Auto-off
function/Backlight function
Highlight "Start-up/Auto-off" by pressing
The Start-up/Auto-off screen appears.
Selecting the Start-up screen:
You can select the start-up screen when the unit is turned on.
1.
Highlight "Start-up" by pressing
2.
Select the desired start-up screen by pressing
Setting the Opening screen:
You can select whether the opening screen is displayed or not when the unit is
turned on.
1.
Highlight "Opening" by pressing
2.
Select the "On" or "Off" radio button by pressing
Adjusting the Auto-off function:
To conserve the battery power, the unit will turn itself off if it has not been used for
a set number of minutes.
1.
Highlight "Auto-off" by pressing
2.
Select the desired auto-off time by pressing
Note: In order to avoid accidentally interrupting data transfers, the Auto-off
function is automatically disabled while communicating with your PC.
Adjusting the Backlight function
1.
Highlight "Backlight" by pressing
2.
Select the desired backlight time by pressing
After setting the above, highlight "OK" by pressing
"OK"). The screen returns to the Settings screen. Tap "OK" to store the settings.
and press
.
and press
.
and press
.
and press
and press
.
and press
and press
.
and press
and press
.
.
.
.
(or tap
Advertisement
Table of Contents
