Attaching The Hand Strap; Installing The Batteries And Initializing - Sharp ZQ-800 Operation Manual

e00_zq800(introduction)60.book Page 11 Wednesday, April 24, 2002 8:45 PM

Attaching the hand strap

Pass the small loop of the hand strap through the eyelet and pass the other end
through the loop as illustrated below.

Installing the batteries and Initializing

Installing the batteries
1.
Slide the battery replacement switch on the back of the unit to the "REPLACE
BATTERIES" position.
2.
Open the battery compartment lid, then gently remove it.
11
Getting Started