Sharp AJ-2105 Operation Manual page 28

INSTALLING THE PRINTER DRIVER
Installing onto Windows 2000 (USB interface)
Make sure that the printer is connected to your computer by
1
USB cable.
Turn on the printer, and then turn on your computer.
2
On this step, "Found New Hardware Wizard" window will appear.
Click the "Cancel" button.
3
Make sure to click the "Cancel" button. If you continue installation without clicking
the "Cancel" button, you may not install the driver successfully.
Insert the supplied CD-ROM into your CD-ROM drive.
4
Double-click "My Computer" (
5
ROM (
Double-click the "Setup" (
6
Check if the appropriate language has been selected, and then
7
click the "OK" button.
Normally, the correct language is selected automatically.
After confirming the message in the "Welcome" window, click
8
the "Next" button.
Be sure to read the descriptions in the "ReadMe" window, and
9
then click the "Next" button.
26
) icon.
), and then double-click the CD-
) icon.