Aligning The Print Head - Sharp AJ-2105 Operation Manual

ALIGNING THE PRINT HEAD

Before printing for the first time or after replacing the print head, make sure to align the print
head position.
Follow the steps below to align the print head.
Make sure that A4 sized paper is set in the tray.
1
Click the "Start" button, select "Settings" and then click
2
"Printers".
Click the "SHARP AJ-2105" icon and from the "File" menu select
3
"Properties" and then click the "Setup" tab.
The printer driver setup screen will appear when "Printing Preferences" of
Windows 2000 or "Document Defaults" of Windows NT 4.0 is selected.
Click the "Advance" tab and then click the "Maintenance"
4
button.
Click the "Start" button of "Print alignment patterns".
5
Click the "OK" button.
6
The "Align print head" dialog box will appear, and a test chart will be printed.
Check the test chart results, and change the preferences to the
7
best setting for each pattern.
1) Select a pattern sample for "Pattern A".
Look at the chart A on your test chart. Select the number under the pattern sample,
in which
30
is located the closest to the centre of the two vertical lines.
Example:
-8
-8 -7 -6 -5 -4 -3
+8
A
-2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8