2) Select a pattern sample for "Pattern B".
Look at the chart B on your test chart. Select the number under the pattern sample,
in which
is located the closest to the centre of the two horizontal lines.
Example:
3) Select pattern samples for "Pattern C" and "Pattern D" respectively.
Look at the chart C and D on your test chart. Select the numbers under the pattern
samples, which have the straightest lines.
Example:
cracked line
Click the "OK" button in the "Align print head" dialog box.
8
The print head will align itself.
If you cannot find any satisfactory pattern sample for each of "Pattern A" to
"Pattern D" settings, select the best ones among the printed pattern samples,
and then go back to step 5. (For Macintosh, go back to step 3 on page 36.)
The printer cannot perform other operations while aligning the print head.
-6
B
-8
-7
-6
-5
-4
-3
-2
-1
-6
C or D
-6
-5
-4
-3
-2
-1
ALIGNING THE PRINT HEAD
+8
0
+1 +2 +3 +4 +5 +6 +7 +8
+1
straight line
0
+1 +2 +3 +4 +5 +6
31