Table of Contents
Advertisement
Aligning the Print Head (part 1)
Align the print head after installing or changing the print head, or if printed lines are not straight, or have blank
spaces. Follow the steps below to align the print head.
1 1 1 1
Make sure that A4 sized paper is set in the tray.
2 2 2 2
Click the "Utility" tab in the printer driver setup
screen, and then click "Maintenance" button.
3 3 3 3
Click the "Start" button of "Print alignment
patterns".
4 4 4 4
Click the "OK" button.
The "Align print head" dialog box will appear, and a test
chart will be printed.
5 5 5 5
Check the test chart results, and change the
preferences to the best setting for each pattern.
1 1 1 1
Select a pattern sample for "Pattern A".
Seventeen block figures with a vertical line on each
vertical side ( ) are printed in pattern A. Of the
seventeen figures determine which block is most nearly
centred between the vertical lines and select the
corresponding number.
Example:
-8
-8
-7
-6
-5
-4
Maintenance
+8
A
-3
-2
-1
0
+1 +2 +3 +4 +5 +6 +7 +8
72
Advertisement
Table of Contents
