Cleaning The Print Head - Sharp AJ-6110 Online Manual

Cleaning the Print Head

If the test page from "Test print head" is faint or uneven, confirm that you are printing on the correct side of the
paper, and the driver setting and ink levels are correct. If these items are OK, then follow the steps below to clean
the print head.
1 1 1 1
Click the "Utility" tab in the printer driver setup
screen, and then click "Maintenance" button.
2 2 2 2
Click the "Start" button of "Auto head cleaning".
3 3 3 3
Click the "OK" button to clean both the black print head
and the colour print head.
Cleaning the print head will begin.
The unit cannot perform other operations while
cleaning the print head.
You can save the ink
consumption by checking the
box for the print head which
has poorer print result.
4 4 4 4
Click the "Start" button of "Test print head", and
then click "OK" button on the confirmation dialog
box to print a test page.
5 5 5 5
Check if the test page was printed clearly.
If print quality is poor, return to step 2 and follow the
procedures again.
Do not clean the print head more than 3 times.
Excessive cleaning of the print head wastes ink.
Reference: If print quality is still poor, refer to
the Print
Maintenance
Changing
Head.
68