Table of Contents
Advertisement
Changing the Ink Tank (part 2)
4 4 4 4
Unpack the ink tank from its protective wrapping
and slowly remove the tape.
Example: Removing the tape of the yellow ink tank
! Be sure to install a new ink tank. Do not use an ink tank
that was once installed and then removed from the print
head. Using such ink tank prevents the system to show
an accurate amount of available ink on your computer.
Besides, print quality with such ink tank is not
guaranteed.
! Hold the tank upright when removing the tape. Do not
touch the uncovered opening on the ink tank, as ink will
get on your hands.
! Ensure that there are no pieces of tape remaining on the
ink tank.
5 5 5 5
Turn the ink tank upside down.
Do not touch this area.
The unit may not print if it is dirty.
6 6 6 6
Insert the ink tank to the print head of
corresponding number.
Match the ink tank number
1
to the print head number.
Hook the projection on the ink tank
2
here to fix it.
Example: Inserting the yellow ink tank
Make sure that the numbers on the ink tanks correspond to
the numbers on the print heads. If they do not correspond to
each other, print problems will occur.
Maintenance
Make sure that each tab
3
securely locks the ink tank
by pressing here.
65
Advertisement
Table of Contents
