Changing The Ink Tank - Sharp AJ-6110 Online Manual

Changing the Ink Tank (part 1)
Ensure the unit is turned on before following the steps below on how to change the ink tank.
During ink tank replacement, if the front cover is left open for more than 8 minutes, the carriage will automatically return to its
home position in order to protect the print head. To return the carriage to the centre position, close the front cover, and then open
it again.
1 1 1 1
Turn the front cover locking knob with one hand
and lift the front cover with the other hand, while
keeping the knob in the unlocked position.
The carriage will automatically move to the centre position.
Reference:
See "INSTALLING THE PRINT HEADS AND
THE INK TANKS" in the Setup Guide and
Operation Manual for more detail on how to
open the front cover.
Do not put your hands into the unit until the carriage
stops at the centre position. Doing so may hurt your
hands. Do not try to move the carriage manually by
force, you may damage the unit.
2 2 2 2
Open the maintenance cover.
3 3 3 3
Remove the old ink tank.
While pressing the tab forward, remove the ink tank.
Example: Releasing the yellow ink
Maintenance
Press the tab forward.
Do not lift the print
head latch.
64