Table of Contents
Advertisement
Scanning an Image
Below is a step-by-step guide for acquiring a scanned image to the Sharpdesk desktop screen using Sharpdesk.
It is assumed that the scanner driver has been installed without changing the default setting, and Sharpdesk is
running.
1 1 1 1
Place a document on the original table.
Reference:
For information on setting a document for
scanning, refer to "MAKING COPIES" in
the Setup Guide and Operation Manual.
2 2 2 2
From Sharpdesk, select "Acquire Image" from the
"File" menu, or click the "Acquire" button (
3 3 3 3
Click the "Preview" button ( ).
The preview image will appear.
If the rotation or angle of the image is different, reset
the document, and click the "Preview" button again.
4 4 4 4
Specify the scanning area, and set the scan
preferences.
To specify the scanning area, follow the steps on the
Screen, or use the
"Auto Scan Area Judgement" button
or
"Image
Area".
To set the scan preferences, use the four buttons displayed on
the
"Standard"
screen. To set your scan preferences in detail,
go to the
"Professional"
contrast of the scanned document, refer to
Screen.
Setting a large area with full colour together with a high
resolution setting, makes the data size large, resulting
in extended scanning times. It is recommended to set
the scanning preferences depending on the type of
original to be scanned, i.e., Text, Text/Graphics,
Photograph, Colour, Black & White.
Preview
screen. To adjust the brightness and
Variation Preview
5 5 5 5
Click the "Scanning" button ( ) after setting your
preferences.
To cancel your scanning job after clicking the "Scanning"
button, press the [Esc] key on your keyboard.
).
( ),
When you close the scanner driver after scanning, the image
data will appear as a new file in Sharpdesk.
Scanning
44
Advertisement
Table of Contents
