Table of Contents
Advertisement
Aligning the Print Head (part 1)
Align the print head after installing or changing the print head, or if printed lines are not straight, or have blank
spaces. Follow the steps below to align the print head.
1 1 1 1
Make sure that Letter sized paper is set in the tray.
2 2 2 2
Click the "Advanced" tab in the properties dialog
box, and then click "Maintenance" button.
3 3 3 3
Click the "Start" button of "Print alignment
patterns".
4 4 4 4
Click the "OK" button.
The "Align print head" dialog box will appear, and a test
chart will be printed.
How to Use the
Printer Properties
Online Manual
5 5 5 5
Print Status
Print
Window
Check the test chart results, and change the
preferences to the best setting for each pattern.
1 1 1 1
Select a pattern sample for "Pattern A".
Look at the chart A on your test chart. Select the number
under the pattern sample, in which
to the center of the two vertically parallel lines.
Example:
-8
-8
-7
-6
-5
-4
-3
-2
Sharing Printer
Maintenance
Maintenance
is located the closest
+8
-1
0
+1 +2 +3 +4 +5 +6 +7 +8
43
Troubleshooting
Advertisement
Table of Contents
