Table of Contents
Advertisement
PART NAMES AND FUNCTIONS
The following illustration lists the part names and function. Before operating, it is advisable
to familiarise yourself with the printer.
The illustration below shows the printer with all the parts installed.
Front Side
Front cover
Open this cover to
change the ink tanks
or print heads.
Paper tray
Adjustable to suit a
variety of paper sizes.
Ink lamp
The light blinks when the
ink is empty, or the ink
tank is not inserted
correctly.
Power lamp
The indicator is lit when
the printer is ready to print.
* If the printer has been
kept idle for more than
20 minutes, the power
will go off and so will the
power lamp.
The printer can be
restarted when the
power button is pressed,
or any print job is sent
from your computer.
Internal Part
Black print head
Applies ink to the
paper.
Black ink tank
Paper lamp
The light blinks when the
printer is out of paper, or a
paper jam has occurred.
Print head latch
Secures the print head into
position for operation.
Output tray
The document is deposited
onto the tray after printing.
Extend the tray when
printing long documents.
Power button
Press to turn the printer
on or off.
Paper button
Press this button after
rectifying a paper jam or
paper empty condition.
Depressing the button
for a few seconds will
activate the test print.
Paper knob
When printing onto an
envelope or thick paper,
adjust the knob to
setting. (Return the knob
to its original setting
after printing.)
Colour print head
Applies ink to the paper.
Cyan ink tank
Yellow ink tank
Magenta ink tank
Carriage
7
Advertisement
Table of Contents
