Presetting The Channels - Sharp LC-17SH1E Operation Manual

Once you have connected up this unit, you will need to search in the channels in order to watch TV stations.
There are two ways that you can do this:
- Automatic Search All stations should be stored in the correct sequence for your region - however if
- Manual Tuning
Automatic Search
1. Select AUTOMATIC SEARCH.
2. Press .
All available channels in your area are automatically
scanned and stored in the memory of the unit.
After scanning, the previous step 1 screen appears.
3. Press MENU twice.
The unit will return to normal TV screen.
4. The automatic search will not necessarily store the channels in the correct order (BBC1 on CH 1
etc.). If you want to change the order of the stored channels, please see page 19.
Notes:
• If you want to skip any channels, refer to page 21.
• When the unit is in the EXT mode, you can't preset the channels.
you do need to change the order of some stations, please refer to the Manual
tuning process.
In this mode the TV searches until a picture appears. If it is a station that you
want to keep, you can choose which channel preset you want to store it on. You
repeat this procedure for each station until you have stored all the desired
stations.

Presetting the Channels

A U TO M AT I C S E A R C H
M A N U A L A D J U S T M E N T
S O R T
B A C K L I G H T
L A N G U A G E
: S E L E C T
AUTOMATIC SEARCH
1 6
E N G L I S H
: A D J U S T
M E N U : R E T U R N
MENU : EXIT
17