Table of Contents
Advertisement
The following functions are available from the remote control handset only.
TV/EXT(AV) Selection
For receiving the desired signal: Press
TV position - to view a normal TV.
EXT(AV) position - to receive through the direct Video
input. EXT1 (from 21 pin SCART socket on the rear left),
EXT2 (from 21 pin SCART socket on the rear right),
EXT3 (from Audio/Video in sockets on the left side) or
PC (from PC IN socket on the left side) indicator
appears on the screen in AV mode.
(FLASH BACK)
This button allows you to go back to the previous channel by pressing
again to return to the channel you were watching.
DISPLAY
When you press
(DISPLAY) once, the channel number and screen picture size etc. will appear. The
display will disappear in 4 seconds.
MUTE
When
(MUTE) is pressed, the TV sound will be turned off completely. To disable this function, press the
@
@
button again or @
@
@ + or –.
SLEEP
To set the unit to turn off, press SLEEP on the remote control. The clock will count down 10 minutes each
time the button is pressed in the order of 120, 110, 100,...20, 10, 0. After the sleep time is programmed, the
display will disappear and will reappear momentarily at every 10 minutes. To confirm the sleep time setting,
press SLEEP once and the remaining time will be momentarily displayed.
To cancel the sleep time, press SLEEP repeatedly until the display turns to 0.
SKIP FUNCTION
After all channels available in your area have been set in memory, you can skip unwanted channels as
follows.
1. Press P M M M M M or ? ? ? ? ? to select the channel which you want to skip.
2. Press SKIP.
When a channel is skipped, the channel number will blink.
3. Skip all unwanted channels the same way following steps 1-2.
Note:
To cancel the SKIP function, press Direct Channel Selection buttons to select the channel which you want
to cancel, then press SKIP again.
Convenient Functions
(INPUT) to select the TV or EXT(AV) mode.
(FLASH BACK). Press this button
CH 5
-:6
21
Advertisement
Table of Contents
