Selecting Monitor (Pc) Mode; Pc-Setting - Sharp LC-17SH1E Operation Manual

f you use your unit as a computer monitor, connect the cable from the
I
output of your computer's video graphics adapter card to the unit's PC
video input. When the unit and computer are switched on, the unit will
automatically detect and adapt to the resolution of the graphics
adapter.
The maximum resolution that can be attained is 1280 by 768
pixels.

Selecting Monitor (PC) mode

1. Press (INPUT) repeatedly until "PC" appears on the
TV screen.
Note:
Each time you press
You are now in Monitor(PC) mode. The resolution of your video graphics adapter is automatically
detected by the unit. Subsequently, whenever the set is switched on it will automatically be in
Monitor mode.
2. To switch back to TV mode, press
Monitor Display Mode
Mode Resolution
VGA 640 X 480
720 X 400
SVGA 800 X 600
800 X 600
XGA 1024 X 768
WXGA 1280 X 768
1280 X 720
(INPUT), the EXT mode will change as follows:
TV EXT1 EXT2
once or press
Refresh rate
60 Hz
70 Hz
56.3 Hz
60.3 Hz
60 Hz
60 Hz
60 Hz
EXT3 PC
(INPUT).

PC-Setting

2+
29