Preset; On-Screen Display Language Setting; Presetting The Channels (Auto); Language - Sharp LC-20AX7X Operation Manual

Preset

On-Screen Display Language Setting

You can select English, Chinese or Arabic as the on-screen
display language.
Directly setting the Language
1
Press LANGUAGE to display the Language screen.
2
Press LANGUAGE to change the setting.
LANGUAGE [ENGLISH]
Setting on the Menu screen
1
Press MENU to display the Menu screen.
2
Press \/| to select "SETUP".
3 Press '/" to select "LANGUAGE", and press ENTER.
Press '/" to select the desired language, and press
4
ENTER.
5
Press MENU to exit.
You can also set the language by using the upper control
panel.
Upper control panel
1
Press MENU on the upper part of the LCD TV set for
more than 2 seconds to display the PRESET mode
screen.
2
Press MENU twice to display the LANGUAGE select
mode screen.
• Press MENU again to change the PRESET mode as shown
below.
AUTO MANUAL
3
Press CH ( )/(
display.
4
Press INPUT to return to the normal screen.
12
3 1, 2 4

LANGUAGE

NORMAL SCREEN
) to select the language you wish to

Presetting the Channels (AUTO)

Automatically tunes in and presets receivable TV stations.
Make sure the antenna cable is properly connected.
Upper control panel
2
1
Press MENU on the upper part of the LCD TV set
for more than 2 seconds to display the AUTO mode
screen.
Sound System
A
• When starting PRESET after setting "SOUND SYSTEM" with
MENU on the remote control, "SOUND SYSTEM" for all
channels are stored into memory.
2
Press VOL (–)/(+) on the upper part of the LCD TV set.
All the TV stations in your area that can be received by
the LCD TV set are automatically preset.
The screen shows whatever is on channel 1 when full
3
auto channel preset is fi nished.
A
• Unused channels are automatically skipped.
• The Preset mode is only available in the TV mode.
• Instead of pressing MENU for more than 2 seconds, you can set
the channel by selecting "CH SETUP" in "SETUP" in the Menu
screen. (See page 14.)
1