4:3 Mode Function; Ext2 Output/Input - Sharp LC-17SH1E Operation Manual

4:3 MODE function / EXT2 OUTPUT/INPUT
Auto 4:3 Default function
In case AUTO mode is selected for wide mode and any WSS signal is not received, you can preset
beforehand either " 4:3 " or "PANORAMA" as the wide mode for the normal picture (4:3 aspect ratio).
1. Select 4:3 MODE in the SETUP menu.
Then press or
2. Press MENU to return to the normal TV screen.

EXT2 OUTPUT/INPUT

When you connect another TV set or S-Video VCR etc. to the rear EXT2 socket on your set with a 21 pin
scart lead, you may have to use the EXT2 SET menu.
OUTPUT defines what is sent to the other TV and INPUT describes the type of VCR.
1. Select EXT2 OUTPUT or EXT2 INPUT.
2. In case of OUTPUT selection
Then press or
position) or MONITOR (the picture on the screen).
In case of INPUT selection
Then press or
S-VIDEO (S-Video VCR).
3. Press MENU to return to the normal TV screen.
to select 4:3 or PANORAMA.
to select TV (the most recent channel
to select EXT (conventional VCR) or
4 : 3 M O D E 4 : 3 / PA N O R A M A
E X T 2 O U T P U T T V
E X T 2 I N P U T E X T
E X T C O L O U R A U TO
: S E L E C T
M E N U
4:3 MODE PANORAMA
EXT2 OUTPUT TV/MONITOR
EXT2 INPUT EXT
EXT COLOUR AUTO
: SELECT
MENU
4:3 MODE PANORAMA
EXT2 OUTPUT TV
EXT2 INPUT EXT/S-VIDEO
EXT COLOUR AUTO
: SELECT
MENU
: A D J U S T
: R E T U R N
: ADJUST
: RETURN
: ADJUST
: RETURN
27