Sharp LC-17SH1E Operation Manual page 18

Presetting the Channels
Manual Tuning
How to tune a station to channel 2 position.
1. Select MANUAL ADJUSTMENT. Then press
2. Press or until the picture appears on screen. If this is
not your desired channel, press
channel appears. If you need to make the picture clearer,
use or (FINE TUNING). Then press OK.
3. Press or to select channel position No.2, then press
OK.
4. Repeat steps 2 through 3 until all the required channels have been stored.
5. When all desired channels have been set in your required position, press MENU three times to
return to normal TV screen.
Note:
It is recommended that you store the stations you tune in the order shown in the table below.
If you have your Satellite/Cable, etc. connected via a SCART lead to this VCR, then press
select it, rather than tuning it in to channel 6.
Channel
1
Position
Station BBC 1 BBC 2
18
or until your desired
2 3 4
ITV Channel 4
.
A U TO M AT I C S E A R C H
M A N U A L A D J U S T M E N T
S O R T
B A C K L I G H T
L A N G U A G E
O K
O K
5
Channel 5 Satellite/Cable
1 6
E N G L I S H
: S E L E C T
: A D J U S T
M E N U : R E T U R N
: F. T U N E : S E A R C H
M E N U : R E T U R N
: S E T
+0
: S E L E C T
: S E T M E N U : R E T U R N
(INPUT) to
6
(if available)
+0