Copying Onto Regular Size Paper - Ricoh SP 5200S Operating Instructions Manual

1
1. Paper guides
3. Press the [ ] key.
4. Select the size and type of the paper.
5. Press [OK].
6. Place the originals, and then press the [Start] key.
7. When the copy job is finished, press the [Clear Modes] key to clear the settings.
• If the bypass tray ( ) is not selected on the display in step 2, press , and then proceed to step3.
• If the display indicates that there is no paper on the bypass tray even though there is paper on it,
remove the paper and then place it on the bypass tray again.
• The following paper sizes can be selected as the standard sizes:
• A4 , A5 , A6 , B5 JIS , B6 JIS , C5 Env , C6 Env , DL Env , 8
1
13 , 8 / × 11 , 8
2
7 1
, 3 / × 7 /
8
1
• To support A4 , 8 /
• To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.
• When the Panel Key Sound is turned off, it will not sound if you insert paper into the bypass tray.
For details about Panel Key Sound, see "System Settings", Network and System Settings
Reference.
• Depending on the environment where the machine is being used, you might at times hear a rustling
noise from paper moving through the machine. This noise does not indicate a malfunction.

Copying onto Regular Size Paper

Makes copies onto regular size paper from the bypass tray.
1. Open the bypass tray.
CFG012
1
/ × 13 , 8 × 13 , 7
4
, 16K
2
× 11 or larger paper sizes, pull out the extender.
2
Copying from the Bypass Tray
1 1 1
/ × 10 / , 5 / × 8
4 2 2
1 1
/ × 14 , 8 / ×
2 2
1 1 1
/ , 4 / × 9 /
2 8 2
2
39