Monitoring And Configuring The Printer; Using Web Image Monitor - Ricoh SP C242DN Software Manual

6. Monitoring and Configuring the
Printer
This chapter explains how to use Web Image Monitor to monitor the printer or change its settings.

Using Web Image Monitor

Using Web Image Monitor, you can check the printer status and change settings.
Available operations
The following operations can be remotely performed using Web Image Monitor on a computer:
• Displaying the printer's status or settings
• Configuring the printer's settings
• Configuring the user restriction settings
• Configuring the network settings
• Configuring the IPsec settings
• Printing reports
• Setting the administrator password
• Resetting the printer's configuration to the factory default
• Creating backup files of the printer's configuration
• Restoring the printer's configuration from backup files
• Configuring the printer's Energy Saver mode setting
Configuring the printer
To perform the operations from Web Image Monitor, TCP/IP is required.
After the printer is configured to use TCP/IP, operations from Web Image Monitor become
available.
Recommended Web browser
• Internet Explorer 6 or later
• Firefox 3.0 or later
• Safari 3.0 or later
• If the previous versions of the Web browser above are used or JavaScript and cookies are not
enabled with the Web browser used, display and operation problems may occur.
• If you are using a proxy server, change the Web browser settings. Contact your network
administrator for information about the settings.
6
71