Configuring The Network Settings; Checking The Network Status - Ricoh SP C242DN Software Manual

6. Monitoring and Configuring the Printer

Configuring the Network Settings

Click [Network Settings] to display the page for configuring the network settings.
This page contains the following tabs: [Network Status], [IPv6 Configuration], [Network Application],
[DNS], [Auto E-mail Notification], [SNMP], [SMTP], and [POP3].

Checking the Network Status

Click the [Network Status] tab on the network settings page to display network information.
6
General Status
Item
Ethernet Speed
IPP Printer Name
Network Version
MAC Address
TCP/IP Status
Item
DHCP
IP Address
Subnet Mask
86
Shows the type and speed of the network connection.
Shows the name used to identify the printer on the network.
Shows the version of the printer's network module (a part of the printer
firmware).
Shows the MAC address of the printer.
Select whether the printer should receive a dynamic IPv4 address
automatically using DHCP. To use DHCP, select [Active]. When enabled,
the items below cannot be configured.
Enter the IPv4 address for the printer.
Enter the subnet mask of the network.
Description
Description