Configuring I/O Timeout Settings - Ricoh SP C242DN Software Manual

6. Monitoring and Configuring the Printer
Bypass Tray Setting Priority
Item
Bypass Tray Setting
Priority
6
• The information about tray 2 appears only when the optional paper feed unit is installed.

Configuring I/O Timeout Settings

Click the [I/O Timeout] tab on the system settings page to configure the I/O timeout settings.
82
Select how print jobs using the bypass tray are handled.
• [System Settings]
The printer prints all print jobs according to the printer's settings. An
error will occur if the paper size/type settings of the printer and printer
driver do not match.
• [Any Size/Type]
The printer prints all print jobs according to the printer driver's settings.
Printing proceeds even if the paper size/type settings of the printer
and printer driver do not match, but If the paper is too small for the
print job, the printed image will be cropped.
• [Any Custom Size/Type]
The printer prints custom size print jobs according to the printer driver's
settings and prints standard size print jobs according to the printer's
settings.
For custom size print jobs, printing proceeds even if the paper size/
type settings of the printer and printer driver do not match, but if the
paper is too small for the print job, the printed image will be cropped.
For standard size print jobs, an error will occur if the paper size/type
settings of the printer and printer driver do not match.
Description