Computer Operation - Frymaster Heated Landing Zone HLZ Operator's Manual

CHAPTER 5: COMPUTER OPERATION AND PROGRAMMING
5.2 Operation
1. Press the power button, turning the HLZ on (the display will light and cycle through an initialization
sequence). The display will read -LO- until the air heater and heater plate are within 15°F of setpoint. It will
take approximately 10 minutes for the HLZ to achieve operating temperature.
NOTE: A small LED will light in the display when the heater plate or air heater is energized.
The display will read LO until both heaters are within 15° F of setpoint.
Heater Plate
When the HLZ is ready for operation, the display reads R E d y (ready). Place product in the HLZ in
accordance with the restaurant's established procedures.
NOTE: To check the actual temperature of a heater, press the corresponding Temperature button once.
To check the setpoint temperature of a heater, press the button twice (an indicator will light when the
setpoint is displayed).
Temperature
Setpoint Indicator
HEATED LANDING ZONE
Press to turn on the computer.
R E
d
220F
6
Air Heater Activation
¡
y