Step 3: Installing Ink Cartridges - Primera Disc Publisher II User Manual

carrier and Robotic Disc Transporter to the center position
allowing for easy access to the bins.
• Load the Input Bin (the bin located on the right-hand side
of the Publisher) with 25 blank discs and place the bins on
the mounting pegs.

Step 3: Installing Ink Cartridges

• Press the Ink Cartridge Button
to move the Ink
and open the ink
• Remove each ink cartridge from its
packaging
• Slowly remove the tape covering
DO NOT TOUCH THE COPPER AREA!
• Insert the ink cartridges into the carrier, copper end
first
• Close the Publisher's front cover.
10 Hardware and Software Set-Up
Cartridge Carrier to the load position
cartridge covers
2
1
1. Push in
2. Lift Up
the cartridge's print head, being
careful to avoid damaging the
barcode label on the underside of
the cartridge.
and snap the cartridge cover in place. Insert the color
in the left holder, monochrome black in the right
cartridge holder.
Color Black