Primera Disc Publisher II User Manual page 37

you have a printer installed and wish to print a print image
onto each disc after it has been recorded. There are two types
of files supported:
*.prn files you've previously created using almost any
Windows graphics application,
*.std files created using SureThing CD labeler.
In the drop down box to the right of the Print checkbox, you
can select any recently used *.prn or *.std files. Or, click the
box next to the print dialog box to browse for saved .std or .prn
files. Find the file you wish to print, highlight it, and click
Open. Or, double-click on it. The file appears in the Image Job
Window print dialog box with its path. To select a *.STD file,
click Browse and change Files of Type to All Files and browse
to the desired *.std file.
In the Drive List, highlight the recorder icon. This is where the
software will send the job for recording. Right click on the
icon and select Select/Deselect as Recorder.
In the Image Job dialog box, set the number of copies, the
speed (if you select a speed that the recorder does not support,
it will default to the immediate lower one), and the action you
desire: Test, Test and Record, Record, Verify and Record, etc.
Press the red Record button to start recording your copies.
If everything was set up properly, the Publisher should now be
recording and printing your discs.
Creating Discs 33