Recording (Copying) A Tv Programme Or Video Tape Onto A Camcorder Tape Sc-D975); (Sc-D975 Only) - Samsung SC-D371 Owner's Instruction Book

ENGLISH
Connection
Recording (Copying) a TV Programme or Video Tape onto a
Camcorder Tape (SC-D975 only)
✤ The Recording (Copying) function works only in <Player> Mode. ➥ page 19
✤ Connect your Camcorder to a VCR or a TV
using the AV jack to record a TV program or
copy a video tape onto a Camcorder tape.
✤ Set the <AV In/Out> to <In> before
Recording (Copying). ➥ page 69
Recording (Copying) onto a
Camcorder Tape
1. Get your TV or VCR ready.
2. Connect the Camcorder to your VCR or TV
with the Audio/Video cable.
I
Connect the Audio/Video cable to the
output jack on your VCR or TV
I
The yellow jack: Video
I
The white jack: Audio (L)- Mono
I
The red jack: Audio (R)
3. Insert an empty tape in your Camcorder.
To record from a VCR
4. Insert the video tape to be played in your
VCR.
I
Pause at the starting point of playing.
5. Start copying by pressing the [Start/Stop] button on your Camcorder.
6. Press the PLAY button on your VCR to play the tape.
To record from a TV
4. Select a TV channel to be recorded.
5. Start recording by pressing the [Start/Stop] button on your Camcorder.
When Recording (Copying) is Complete:
Press the [I (Stop)] button on your Camcorder to stop recording (copying).
[ Notes ]
I
If you operate the Camcorder connected to another device, always power
the Camcorder from household AC outlet using the AC power adapter.
I
The recorded contents can be played back in the same manner as when
playing back images recorded on this camcorder.
I
Copy-protected video tapes such as Macrovision or unstable TV signals
cannot be recorded on this camcorder.
(
✤
VCR
or
Signal flow
TV
Audio/Video Cable
SC-D371/D372 SC-D375(H)/D975
4.
5.
I
I
I
SC-D975)
<Player> (
✤
Camcorder
✤
In/Out>
Audio/Video
Cable
1.
2.
I
I
I
I
3.
VCR
4.
I
5.
6. VCR
[Start/Stop]
[I (STOP)]
➥ 19
)
<AV
<In>
➥ 69
VCR
VCR
VCR
VCR
[Start/Stop]
PLAY
Macrovision
71 71