Reviewing And Searching A Recording (Rec Search) - Samsung SC-D371 Owner's Instruction Book

ENGLISH
Basic Recording

Reviewing and Searching a Recording (REC SEARCH)

✤ The REC SEARCH function works only in <Camera> mode.
➥page 19
✤ Used to review previously recorded images or to find a point to
record a new image in the STBY mode.
Record Search (REC SEARCH)
1. Set to STBY mode by pressing [Start/Stop] button.
2. [REC SEARCH -] enables you to play the recording
backwards and [REC SEARCH +] enables you to
play it forwards, as long as you keep each button
pressed down.
I
If you press the [REC SEARCH -] button in
STBY mode, your Camcorder will play
in reverse for 3 seconds and return to the original
position automatically.
[ Notes ]
I
Mosaic shaped distortion may appear on the screen
while in Record Search mode.
I
Pressing [Start/Stop] button after REC SEARCH
will overwrite the images recorded after that point.
When a cassette is loaded and the Camcorder is left in the STBY
mode for more than 5 minutes without being used, it will switch off
automatically.
To use it again, press the [Start/Stop] button or set the [Power]
switch to [OFF] and then back to [CAMERA].
This auto power off feature is designed to save battery power.
36 36
, (
✤
<Camera> (
➥ 19
✤
(REC SEARCH)
1. [Start/Stop]
2. [REC SEARCH -]
[REC SEARCH +]
I
I
I
[Start/Stop]
[OFF] [CAMERA]
)
)
[REC SEARCH -]
[Start/Stop]
[Power]