Searching Quickly For A Desired Scene (Setting The Zero Memory) (Sc-D375(H)/D975 Only); Zero Memory) - Samsung SC-D371 Owner's Instruction Book

ENGLISH
Basic Recording
Searching quickly for a desired scene (Setting the ZERO
MEMORY) (SC-D375(H)/D975 only)
✤ The ZERO MEMORY function works in both <Camera> and <Player>
modes. ➥page 19
✤ You can mark a point on a tape that you want to return to following
playback.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Press the [ZERO MEMORY] button on the remote
control before the recording or during playback at the
point where you wish to return.
I
The time code is changed to a tape counter that is
set to ZERO MEMORY with the <
(ZERO MEMORY indicator).
I
If you want to cancel the ZERO MEMORY function,
press the [ZERO MEMORY] button again.
4. Finding the zero position.
I
When you have finished playback, fast forward or
rewind the tape in stop mode.
The tape stops automatically when it reaches the
zero position.
I
When you have finished recording, set the [Power]
switch to [PLAYER] and press the [œ œ œ œ (REW)]
button.
The tape stops automatically when it reaches the
zero position.
5. The tape counter with the <
from the display and the tape counter is changed to the time code.
[ Notes ]
I
In the following situations, ZERO MEMORY mode may be canceled
automatically:
- At the end of the section marked with the ZERO MEMORY function.
- When the tape is ejected.
- When you remove the Battery Pack or power supply.
I
The ZERO MEMORY may not function correctly where there is a break
between recordings on the tape.
1
0:00:00>
> (ZERO MEMORY indicator) disappears
SC-D375(H)/D975)
✤
(
<Camera>
➥ 19
✤
1.
[PLAYER]
2.
3.
[ZERO MEMORY]
I
I
[ZERO MEMORY]
4.
I
œ
I
[PLAYER]
5.
I
I
(

ZERO MEMORY)

) ( )
<Player>
[Power] [CAMERA]
[Mode] [TAPE]
< 0:00:00>
[Power]
[œ œ œ œ (REW)]
37 37