Recording (Copying) A Tv Programme Or Video Tape Onto A Disc (Vp-Dc171I/Dc171Bi/Dc171Wi/Dc175Wi/Dc575Wi Only) - Samsung VP-DC171I Owner's Instruction Book

ENGLISH
DVD Camcorder: Connection

Recording (Copying) a TV Programme or Video Tape onto a Disc (VP-DC171i/DC171Bi/DC171Wi/DC175Wi/DC575Wi only)

 The Recording (Copying) function works only in Player Mode. page 26
 Connect your DVD Camcorder to a VCR or a TV using the AV jack to record a TV programme or copy a video tape to a disc.
Set the AV In/Out before Recording (Copying). page 83
Recording (Copying) onto a Disc
1. Get your TV or VCR ready.
2. Connect the DVD Camcorder to your VCR or TV with AV
cable.
 Connect the AV cable to the output jack on your VCR
or TV.
 The yellow jack: Video
 The white jack: Audio (L) – Mono
 The red jack: Audio (R)
3. Insert an empty disc in your DVD Camcorder.
 Please refer to page 123 for selecting and formatting
discs.
To record from a VCR
4. Insert the tape to be played in your VCR.
 Pause at the starting point of playing.
5. Start copying by pressing the [Record Start/Stop] button on your DVD Camcorder.
6. Press the PLAY button on your VCR to play the tape.
To record from a TV
4. Select a TV channel to be recorded.
5. Start recording by pressing the [Record Start/Stop] button on your DVD Camcorder.
When Recording (Copying) is Complete:
Press the [Record Start/Stop] button on your DVD Camcorder to stop recording(copying).
Notes
 If you operate the DVD Camcorder connected to another device, always connect the DVD Camcorder to an AC outlet using the
AC power adapter.
Copy-protected contents such as Macrovision or unstable TV signals cannot be recorded on this DVD Camcorder.

88
TV
or
VCR
Signal flow
AV Cable
DVD Camcorder