Frymaster FOOTPRINT H50 Service And Parts Manual page 80

ITEM PART #
1 810-1164
2 200-5996
3 807-1926
4 826-2024
5 807-3484
6 106-0531SP
7 816-0217
8 807-2971
9 807-1006
10 807-3366†
807-3365†
11 826-2264
106-6706
807-4330
807-4343
* 106-6711
12 106-0387
13 806-4973
14 807-1359
15 826-1366
16 809-0250
17 807-0833
18 807-0834
19 809-0441
20 809-0354
21 809-0098
22 826-1346
23 810-2763
24 810-2243
25 826-1337
26 807-1948
27 806-6085
28 807-3843
807-3293
* 826-1721
* 807-1200
* 807-1878
* 806-3660
* Not illustrated.
† For dual-vat units, use 807-3365 Single-Spark Ignition Module (see NOTE 1).
NOTE 1: U.S., Canadian, Hong Kong, and Mexican units use two different modules depending upon the
configuration of the frypot. Dual-vat units use two 807-3365 Single-Spark Ignition Modules. Full-vat units
use one 807-3366 Dual-Spark Ignition Module. Also, in full-vat units, only one latch relay (Item 17) is used,
located in the lower right socket.
NOTE 2: Basket Lift Relays (Item 18) are present only on units equipped with basket lifts.
Block, One-Piece Screwless Terminal
Box, One-Piece Component
Bushing, .875-inch Split
Cable, 21-inch Ignition (comes with Rajah connector [Item 5])
Connector, Rajah
Fuse Assembly, Inline
Insulation, Terminal Block Paper
Ignition Module, Australian
Ignition Module, CE and Non-CE export (except Australia, Canada, HK, Mexico)
Ignition Module, Dual-Spark Full-vat (U.S., Canadian, HK, and Mexican units)
Ignition Module, Single-Spark Ignition Module Dual-vat (U.S., Canadian, HK,
and Mexican units)
Interface Board Kit; U.S., CE and non-CE (except Hong Kong)
Interface Board SMT, U.S., CE and non-CE (except Hong Kong)
Sound Device/Speaker Adapter Harness SMT
Wire Harness, SMT Interface Board to Ignition Module
Interface Board, Fast Computer
Interface Board, Australian
Interface Board, Hong Kong
Mount, Ty-Wrap
Nut, 4-40 Keps Hex (Pkg. of 25)
Nut, 6-32 Keps Hex
Relay, DPDT 5A 12VDC Latch/Heat (See NOTE 1)
Relay, SPDT 15A 12VDC Basket Lift (See NOTE 2)
Screw, #8 X 1 1/2-inch Hex Washer Head
Screw, 4-40 X 3/4-inch Slotted Round Head
Screw, 6-32 X 1 1/4-inch Slotted Round Head
Spacer, Ignition Module (Pkg. of 10)
Spacer, Interface Board
Spring, Relay Retaining
Tab, 1/4-inch Terminal (Pkg. of 5)
Ty-Wrap
Wire Assembly, Ignition Module
Fuse 3A 250V Domestic
Fuse 5A 125V International Only
Ignition Cable (2 ignition cables, 2 rajah connectors)
Ignition Wires, 27-inch (used with 807-1006)
Ignition Wires, 19-inch (used with 807-1006)
Sound Device, High Output (use 810-3141 for SMT sound device with SMT
connector)
COMPONENT
2-24