Maintenance; After Finishing A Recording - Samsung SCD33 Owner's Instruction Manual

ENGLISH

Maintenance

After finishing a recording

At the end of a recording you must remove the power source.
When recording with a Lithium Ion Battery Pack, leaving the pack
on the camcorder can reduce the life span of the battery. Hence, it
should be removed from the camcorder.
1. Slide the TAPE OPEN/EJECT switch in the
direction of the arrow.
Opening the cassette door ejects the tape
automatically.
Please wait while the tape is completely
ejected.
2. After removing the tape, close the door and
store the camcorder in a dust free
environment.
Dust and other foreign materials can cause square-shaped
noise or jerky images.
3. Set the power switch to the OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery
Pack.
Hold down the BATTERY RELEASE button and slide the
battery pack in the direction of the arrow.
2
1
3
99 99