Connecting To A Pc - Samsung SCD33 Owner's Instruction Manual

ENGLISH
USB interface

Connecting to a PC

1. Connect a USB cable to the USB port on the PC.
2. Connect the other end of the USB cable into the proper terminal on
the camcorder. (USB jack)
- If a PC is connected to the camcorder with a USB cable only
the Power Switch, Zoom Switch, Mode Switch and NITE PIX
operate.
Disconnecting the USB cable
After completing the data transmission, you must disconnect
the cable in the following way:
1. Select the removable disc icon and click the right mouse button to
select [Eject].
2. Select [Confirm] and disconnect the USB cable when the Windows
Splash screen appears.
Notes
If you disconnect the USB cable
from the PC or the camcorder
while transferring, the data
transmission will stop and the
data may be damaged.
If you connect the USB cable to
a PC via a USB HUB or
simultaneously connect the
USB cable along with other
USB devices, the camcorder
may not work properly.
- If this occurs, remove all
USB devices from the PC and reconnect the camcorder.
USB
USB
81 81