Connecting A Power Source; To Use The Ac Power Adapter And Dc Cable; To Select The Camcorder Mode - Samsung SCD33 Owner's Instruction Manual

ENGLISH
Preparation

Connecting a Power Source

There are two types of power source that can be connected to your
camcorder.
- The AC Power Adapter and AC cord : used for indoor recording.
- The Battery Pack : used for outdoor recording.

To use the AC Power adapter and DC Cable

1. Connect the AC Power adapter to
the AC cord.
2. Connect the AC cord to a wall
socket.
Note
The plug and wall socket type may
differ according to your resident
country.
3. Connect the DC cable to the
DC jack socket of the camcorder.
(When the battery is attached on
the set, you should keep outside
the projection of the DC cable.)
4. Set the camcorder to each mode by
holding down the tab on the power
switch and turning it to the CAM or PLAYER mode.

To select the CAMCORDER mode

If you want to use this unit as a camcorder,
set the mode switch to TAPE position.
If you want to use this unit as a DSC
(Digital Still Camera), set the mode switch to
MEMORY STICK position.
23 23