Connecting To A Tv Which Has No Audio And Video Input Jacks; Playback - Samsung SCD33 Owner's Instruction Manual

ENGLISH

Playback

Connecting to a TV which has no Audio and Video input jacks

You can connect your camcorder to a TV through a VCR.
1. Connect the camcorder and VCR with
the Multi-AV cable.
The yellow plug : Video
The white plug : Audio(L) - Mono
The red plug : Audio(R)
2. Connect a TV to the VCR.
3. Set the power switch on the camcorder to
PLAYER mode.
4. Turn on both the TV and VCR.
Set the input selector on the VCR to LINE.
Select the channel reserved for your VCR on the TV set.
5. Play the tape back.
Playback
You can play the recorded tape in PLAYER
mode.
1. Connect a power source and set the power
switch to PLAYER mode.
2. Insert the tape you wish to play back.
3. Using the (FF) and
find the first position you wish to play back.
4. Press the (PLAY/STILL) button.
The images you recorded will appear on the TV after a few
seconds.
If a tape reaches its end while being played back, the tape will
rewind automatically.
Note
The playback mode (SP/LP) is selected automatically.
70 70
VCR
ANTENNA
(REW) buttons,
VIDEO
AUDIO(L)
AUDIO(R)
S-VIDEO
TV
A/V OUT
CAMCORDER