Audio Dubbing; Dubbing Sound - Samsung SCD33 Owner's Instruction Manual

ENGLISH
Advanced Recording

Audio dubbing

The AUDIO DUBBING function only works in PLAYER Mode.
You can add sound to the original sound on a pre-recorded tape,
recorded in SP mode with 12bit sound.
Use the internal and external microphones or other audio equipment.
The original sound will not be erased.

Dubbing sound

1. Set the camcorder to PLAYER mode.
If you want to use an external microphone,
connect the microphone to the external MIC
input jack on the camcorder.
When you wish to dub using the External A/V
input, connect the Multi-AV cable to the
camcorder by inserting the Multi-AV cable into
the Multi-AV Jack at the front side of the
camcorder. (SCD34/D39 only)
- Press the MENU button, move the MENU
SELECTOR to highlight A/V and push the
MENU SELECTOR.
- Move the MENU SELECTOR to highlight
AV IN/OUT and push the MENU
SELECTOR to select AV IN/OUT.
- Move the MENU SELECTOR to highlight
AV IN(or S-VIDEO IN) and push the
MENU SELECTOR to select AV IN(or
S-VIDEO IN).
2. Press the (PLAY/STILL) button and find
the timeframe of the scene to be dubbed.
3. Press the (PLAY/STILL) button to pause
the scene.
4. Press the A.DUB button on the Remote
Control.
A.DUB will be displayed on the LCD.
The camcorder is in a ready-to-dub state for dubbing.
5. Press the (PLAY/STILL) button to start dubbing.
Press the (STOP) button to stop the dubbing.
Notes (SCD34/D39 only)
You can not use the audio dubbing function while playing a write
protected video tape.
When you wish to dub using the External A/V input, you must connect
the Multi-AV cable to the audio system from which you wish to record.
You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.
Audio (L) Audio (R)
AV IN
(SCD34/D39 only)
63 63