System Requirements; Recording With A Dv Connection Cable - Samsung SCD33 Owner's Instruction Manual

ENGLISH
IEEE 1394 Data Transfer

System requirements

CPU : faster Intel ® Pentium III™ 450Mhz compatible.
Operating system : Windows
Main memory : more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card

Recording with a DV connection cable

1. Set the power switch to PLAYER
mode.
2. Connect the DV cable (not supplied)
from the DV IN/OUT port of the
camcorder to the DV IN/OUT port of
the other DV device.
Make sure that DV IN appears on
the screen.
3. Press the START/STOP button to
begin REC PAUSE mode.
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the
picture.
5. Press the START/STOP button to start recording.
If you want to pause recording momentarily, press the
START/STOP button again.
6. To stop recording, press the
Notes
When using this camcorder as a recorder, the pictures that appear
on a monitor may seem uneven, however recorded pictures will not
be affected.
Operation are not guaranteed for all the recommanded computer
environments mentioned above.
78 78
® 98SE, ME, XP, Mac OS (9.1~10.2)
(STOP) button.
IEEE 1394
™
®